Blistered Trucks 33mm - Raw
24 HOUR FLASH SALE - INTRODUCTORY PRICE OF ONLY $30 PER SET!
A new batch of Blistered Trucks is here! Now in 4 high quality finishes: Raw, Chrome, Gold, and Neochrome. Each set comes pre-installed with our Blistered V3 Pivot Cups and Super Bushings. Our exclusive hardware is included in every set: 4 Black Blistered Locknuts for the wheels, and both our Standard and Inverted Kingpins.
READ: Installation instructions: First, remove the 4 screws from the baseplate. Next, insert the pivot cup from the bottom of the baseplate. Mount the trucks to your deck using the 4 screws. Now tighten the kingpin a bit (it will be too loose initially) and you're good to go. Please note that if you want to ride loose trucks you will need to install your own bushings. The included super bushings will work only for medium-tight ride on the Blistered Trucks, if you loosen them too much the hangar can pop out from the baseplate, which is solved by using a smaller bottom bushing.
This package also includes thick Inverted Black Kingpins that you can switch out the silver ones to. The black ones are the best! Plus, you'll find a set of skinny black kingpins with two locknuts, these are our Standard Kingpin conversion kit, included free with every set! Using two tools (with your trucks taken off of your board) you can install the Standard (instead of Inverted) kingpins.
Blistered Trucks are professional fingerboard trucks designed from scratch by Bailey Burtner, the original creator of Blistered. These are an entirely unique geometry different than any other trucks on the market and feature the Blistered name and logo debossed on them.
Compared to other trucks, Blistered trucks are in-between the wheelbase length of BRTs versus Dynamics (shorter wheelbase of BRT makes for a lower pop, longer wheelbase of Dynamic makes for a higher pop, ours are right in the middle!)
Blistered Trucks work with any single bearing wheels that have a bearing lock mechanism. (We also have a specific Dual Bearing edition of these trucks available) Any wheels that you'd use with other professional fingerboard trucks will work perfectly on these trucks! Only John Cowart Blistered Wheels are not compatible. It is normal for wheels to have a small amount of side-to-side wiggle room on Blistered Trucks.
34mm Trucks actual measurement is closer to 33mm, exact width depends on which wheels are used.