DUAL BEARING EDITION Blistered Trucks 34mm+ Raw
A new batch of Blistered Trucks is here! Now in 4 high quality finishes: Raw, Chrome, Gold, and Neochrome. Each set comes pre-installed with our Blistered V3 Pivot Cups and Super Bushings. Our exclusive hardware is included in every set: 4 Black Blistered Locknuts for the wheels, and both our Standard and Inverted Kingpins.
READ: Installation instructions: First, remove the 4 screws from the baseplate. Next, insert the pivot cup from the bottom of the baseplate. Mount the trucks to your deck using the 4 screws. Now tighten the kingpin a bit (it will be too loose initially) and you're good to go. Please note that if you want to ride loose trucks you will need to install your own bushings. The included super bushings will work only for medium-tight ride on the Blistered Trucks, if you loosen them too much the hangar can pop out from the baseplate, which is solved by using a smaller bottom bushing.
This package also includes thick Inverted Black Kingpins that you can switch out the silver ones to. The black ones are the best! Plus, you'll find a set of skinny black kingpins with two locknuts, these are our Standard Kingpin conversion kit, included free with every set! Using two tools (with your trucks taken off of your board) you can install the Standard (instead of Inverted) kingpins.
Blistered Trucks are professional fingerboard trucks designed from scratch by Bailey Burtner, the original creator of Blistered. These are an entirely unique geometry different than any other trucks on the market and feature the Blistered name and logo debossed on them.
Compared to other trucks, Blistered trucks are in-between the wheelbase length of BRTs versus Dynamics (shorter wheelbase of BRT makes for a lower pop, longer wheelbase of Dynamic makes for a higher pop, ours are right in the middle!)
Dual Bearing Edition Blistered Trucks work with any dual bearing wheels. (We also have a normal single bearing edition of trucks available) Any wheels that you'd use with other professional fingerboard trucks will work perfectly on these trucks! As with all Dual Bearing trucks, if your wheel is not spinning, you may need to loosen the lock nut about 1/4 turn.
34mm Dual Bearing Trucks actual width measurement with wheels on depends on which wheels are used. Use with G10 wheels for a skinnier fit for 34mm decks and use with G9 wheels for a wider fit for 35mm to 36mm wide decks!